The New RS Turbo 3D printer is expertly crafted for precise, sharp details and a seamless 3D printing experience.
Extra $50 Off Code: HGNEW
New to HeyGears? Get $50 Off 3D Printers – Use Code: HGNEW
(New users only. Code valid for 3D printers.)
Try PAH10 – Just Released
PAH10 Black is a high-stiffness,high-precision resin. It features a tensile modulus of 3150 MPa, offering exceptional long-term deformation resistance. It is ideal for load-bearing structural designs, silicone mold tooling, component housings, accessories and fittings.
Resin Highlights
- Exceptional Deformation Resistance
- ±0.05 mm Printed Part Tolerance for Precise Assembly
- 0.14 mm Thin-Walled Printability
- Heat-resistant up to 95 °C / 203 °F
- Long-Term Dimensional Stability
- Save More, Achieve More — 57% Lower Cost Than Comparable
RS Turbo Resin Compatibility & Recommendations
RS Turbo Compatible Resins:
PAS10, PAF10, PAP10, PARP10, PAWR10, PAU11, PAWW10, PAWW20.
🛒 You can [click here] to browse all resins for RS Turbo printers.If you're not sure which resin to choose, here are our top picks for the RS Turbo:
- PAS10 (Black, White, Purple): Best value for everyday use. Great for aesthetic prototypes, miniatures, and figurines.
- PAF10: Flexible resin that handles fine details well. Excellent for gaming minis, figurine accessories, and flexible prototypes.
- PAP10 (Gray, Black): Pro choice for models with intricate structures and fine details. Ideal for detailed tabletop miniatures and models with textured surfaces.
- 🔍 If you're a miniature enthusiast, check out [this page] for more resin suggestions.
Product Highlights
Optimized Amber Screen：
- High Contrast Ratio of 566:1
- For sharper details and defect-free surface quality
- Over 1 million printed layers capability
C5 grade Z-axis module for stable layer thickness, enhancing the surface smoothness and accuracy.
Dynamic Motion Algorithm 3.0 for speed increases up to 33%*
Auto Assisted Printing:
- Floating Screen Auto Leveling
- Automatic Resin Refill
- Automatic Resin Heating**
*Data sourced from HeyGears Lab, utilizing PAWW10 water-washable resin, compared to conventional motion control 3D printing. The exact speed increase may vary based on model.
** with RS Heated & Pulsing Release Resin Tank (purchased separately)
Package Includes
Reflex RS Turbo:
UltraCraft Reflex RS Turbo 3D Printer x1
Reflex RS Turbo with Pulsing Release Module :
UltraCraft Reflex RS Turbo 3D Printer x1
UltraCraft Pulsing Release Module x1
UltraCraft Reflex RS Turbo Heated & Pulsing Release Resin Tank x1
Pairs well with
Reflex RS Turbo 3D Printer
We're committed to providing you with the best service. Please don't hesitate to reach out if you have any questions.
-
Shipping Information
Free shipping on orders over $399. Click here for more shipping details.
-
Customer Support
Need assistance? We are here to help!
WhatsApp:
+1 949-283-2998（US）
Mon-Fri, 9AM-5PM PSTEmail Support:
contact@heygears.com
Technical Support:
customersupport@heygears.com
-
Get Started
Getting Started with Your HeyGears 3D Printer
-
FAQ’s
Please read our FAQs page to find out more.
Hear It From Our Users
Optimized Amber Screen
Stunning Details with Fast Speed
High Contrast Ratio of 566:1
The Amber Screen features a custom composite design with dyed polarizer and optical films, boosting the contrast ratio to 566:1—nearly a 60% increase over the previous generation.
Precise Prints with Sharper Details
The dyed polarizer film layer utilizes dye macromolecules, allowing for better control of light transmittance. This reduces overexposure or underexposure, ensuring sharp details for 3D prints.
Smooth & Defect-Free Surfaces
The Amber Screen features an optical film layer engineered to transmit light at 90° optimal angles, reducing stray light reaching the curing layer and ensuring residue-free surface smoothness.
Over 1 Million Layers 3D Printing Capability
The dyed polarizer film employs dye macromolecules with excellent UV resistance and heat stability. This minimizes degradation, leading to reduced contrast decay and improved light projection reliability, ultimately extending the screen's lifespan.
*Data sourced from HeyGears Lab. Molecular structure for illustration purposes only.
LCD Screen Light Intensity Visualization
To achieve printing high accuracy and reliability, we partition the screen into 60 zones and calibrate it with a full-screen tool, ensuring light intensity variation remains within ±3%* for a printing tolerance of ≤0.05 mm.
Printed Results Assembly Comparison
The RS Turbo automatically calibrates the screen using NFC data, keeping light intensity differences within 5%* and reducing variations in light intensity to ensure printing precision after screen replacement.
*Data sourced from HeyGears Lab
Reliable C5 grade Z-axis Module
High repeat positioning accuracy ensures layer positioning errors are no more than 2 μm*. Tested with a 50 kg load across ten thousand runs.
Adaptive Z-axis Compensation
Adaptive Process Packages
The adaptive process packages allows the RS Turbo printer to adjust the Z-axis compensation adaptively for each resin, to support up to 180 combinations of different angles, hole sizes, and edge types.
Z-axis Compensation Comparison
This approach minimizes deformation and resin buildup on support surfaces, and reduces post-processing time compared to using just a single z-axis compensation parameter.
Built for High Speed 4.5 s/layer Average Printing Speed*
*Data sourced from HeyGears Lab. With high-speed water-washable resin PAWW20, the average printing speed for lattice models reaches 4.5s/layer.
**Printer frame flex within ±2 μm.
***Cools screen temperature by up to 10℃ during printing.
Dynamic Motion Algorithm 3.0, 33% Increase in Print Speed*
*Data sourced from HeyGears Lab, utilizing PAWW10 water-washable resin, compared to conventional motion control 3D printing. The exact speed increase may vary based on model.
Single-Layer Dynamic Motion Control
Utilizing aseven-segment motion control logic per layer, the RS Turbo reads real-time force sensor data at 80 times per second, allowing it to adjust motion parameters efficiently, reducing redundant time and preventing printing failures.
Comprehensive Dynamic Motion Control
This algorithm assesses printing difficulty for each layer using factors like cross-sections, part spacing, and quantity, selecting from 18 optimized motion control parameters to ensure quality while enhancing speed.
Printing Results Comparison
Automatic Pre-processing
Complete Pre-processing in Just One Minute
One-click slicing without manual adjustment.
Automatic Pre-processing
Automatic Repair Prevents Failures
Automatically detects and repairs model defects such as inverse normals, holes, and intersecting shells.
Intelligent Auto-Supports
Automatic Pre-processing
Intelligently configured scaffold supports result in reduced detachments and a higher printing success rate.
Force Value Monitoring System
Residue Detection
Force sensors with a sensitivity of 0.1 N can detect resin residue as small as 0.2 mm and can auto-stop upon detection or print failure.
Automated Printing Assistance
Floating Screen Auto Leveling
A floating screen system with a deviation of 0.15° eliminates gaps of up to 240 µm* for automatic leveling.
Automated Printing Assistance
Automatic Resin Heating
The optional RS Turbo heated resin tank* uses an integrated heater for higher efficiency. It can elevate resin temperature from 50 °F (10 °C) to an optimal 73 °F (22 °C) in 20 minutes*, auto heating maintains this temperature throughout the printing process for optimal results.
*Requires a separate purchase of the RS Heated & Pulsing Release Resin Tank*Data sourced from HeyGears Lab
Automated Printing Assistance
Automatic Resin Refill
Automatic resin refill before and during printing.
A Complete Production System
Specifications
3D Printing Technology:
LCD (MSLA)
Screen:
10.3-inch 8K Amber Screen
Optical Wavelength:
405 nm
Z-axis Module:
C5 Grade Accuracy
Build Volume:
222*122*228 mm
XY Native Pixel:
29.7 μm
Accuracy:
±15 μm
Layer Thickness:
30-100 μm
Weight:
20 kg
Rated Power:
180 W
Voltage:
100-240 V~50/60 Hz
Size:
380*360*584 mm
Connectivity:
USB/WIFI
Language:
English, Simplified Chinese, Japanese
Compatible Resin
PARP10、PAS10、PAWW10、PAP10、PAWR10、PAF10、PAWW20
Included in the Box
Printer
Power Cord
Part Removal Tool
Resin Tank
Build Platform
Allen Wrench
Scraper
I've been extremely pleased with the results and reliability of the printer. After having 5 or 6 other resin prints of various brands this is the only one that consistently performs without the hours of calibrations and tweaking of settings to dial. There are some things I would like such as a way to hang the build plate to let the resin drain back into the vat. Even a slight concave shape to the top would prevent a lot of the resin from pooling on top of the build plate after it's finished. Not a showstopper but I have to wipe up a lot of resin drips.
Amazing printer. I have no fails, and very very little printing artifacts to repair.
I just upgraded to an heygears reflex rs turbo. After using it for about two weeks now i cant ever see myself going back to any other brands. Aside from a few errors on my side with drain holes and orientation, it has printed flawlessly every time with amazing details.
Perfect prints
Easy to use, immediate results.
Compared to my previous printer there is no set up, no tweaking of the settings, the printer just works!
Of course you need to adjust the supports and the models in the slicer, which is really user friendly.
The mobile app is a bonus for the ease of use and the alerts!
I highly reccomend the printer!
FAQs
Please read our FAQs page to find out more.
How is the Reflex RS Turbo 3D printer different from other resin 3D printers?
The Reflex RS Turbo features an upgraded Amber Screen with a high contrast ratio of 566:1. This high contrast allows for precise exposure control, ensuring every detail is captured clearly. Additionally, it includes a C5-grade Z-axis module with ±2μm motion accuracy and a Dynamic Motion Algorithm 3.0, enabling up to 33% faster print speeds. You'll achieve sharper, more precise prints while enabling fast printing speeds.
Reflex RS Turbo 3D printer benefit of the upgraded amber screen?
The high-contrast amber screen improves the curing efficiency of each layer by controlling light transmission more precisely. It minimizes light bleeding and stray UV exposure, which helps produce models with sharper edges, smoother surfaces, and fewer printing errors. The screen also offers improved UV resistance and thermal stability, resulting in a longer service life and more consistent print quality over time.
What materials are compatible with the Reflex RS Turbo?
The Reflex RS Turbo is optimized for HeyGears’ advanced resin lineup, including PAP10 Precise Detail Resin and PAWW10 water-washable resin. It can also work with a variety of UV-curable resins depending on your specific application, whether you're printing miniatures and figurines, engineering parts, or display-ready prototypes.
Is the HeyGears Reflex RS Turbo suitable for beginner-level users?
While the RS Turbo is designed with professional-grade components, it also features a user-friendly interface and streamlined printing process. It is especially well-suited for intermediate users who are upgrading from entry-level machines and want better speed, stability, and detail accuracy without a steep learning curve.
What types of models can the Reflex RS Turbo print?
This printer excels in printing high-detail and application-specific models, such as:It can adapt to complex geometric shapes and can easily produce miniature models and armor parts.Figure statue table chess, movable models, electronic products, and outdoor equipment.Engineering-grade parts for testing or presentation.Detailed models such as jewelry prototypes, molds and figurines.Various end products and industrial uses, such as parts and housings.
Is it easy to maintain the HeyGears Reflex RS Turbo?
Yes. Thanks to its modular structure and stable mechanical components, the RS Turbo requires minimal maintenance. The robust Z-axis and screen design reduce the need for frequent calibration or part replacements. With regular cleaning and basic care, users can expect consistent, high-quality prints across for long term.