ウルトラクラフト パルシングリリースモジュール

販売業者HeyGears

ウルトラクラフト パルシングリリースモジュール

$490.00
送料はチェックアウト時に計算されます。
注意: この製品は、「Reflex パルシングリリース樹脂タンク」または「Reflex RS 加熱 & パルシングリリース樹脂タンク」と併用する必要があります。
UltraCraft パルシング リリース モジュールは、定期的な膨張と収縮によってリリース フィルム内に正圧と負圧のサイクルを発生させ、各層の剥離力を約 50% 削減することで生産効率を高めます。

製品のハイライト

UltraCraft パルシングリリースモジュールは、すべてのHeyGears樹脂と互換性があります。剥離力を低減することで、以下のメリットが得られます。

  • サポートが25%減少*
  • より多くの特殊特性樹脂のロックを解除する
  • 特定の樹脂を使用すると、印刷速度が最大 20% 速くなります*

（*PAU10に基づくデータです。）

製品に含まれるもの:
  • ウルトラクラフト パルスリリースモジュールホスト x1

Pairs well with

Upgraded for More Advanced Pulse Control

Improved Surface Quality for Precise Details

Large-format Parts

Self-supporting Complex Structures

Less Support Waste, Faster Post-processing

25%~54% Less Time Needed for Sanding or Polishing

The total area of support contact points has been reduced by 25% to 54%*, resulting in a decrease in the time needed for sanding or polishing.

20% - 60% Fewer Supports

A lower peeling force reduces the demand for supports. As a result, support material usage is cut by 20%-60%* while ensuring successful prints, improving resin utilization.

*Data sourced from HeyGears Lab, the results may vary with different resins. For low-viscosity materials, it is recommended to adjust the support critical angle to ensure printing quality.

Reduced Peeling Force, Enhanced Print Results

How it Works

During the printing process, the PRM 2 creates a cycle of positive and negative pressure within the release film with periodic inflation and deflation.

This creates a larger peeling angle, reducing the force needed to separate the printedpart from the release film.

Reduce Peeling Force by Approximately 50%*

The Reflex 2 series, combined with the Pulsing Release Module 2, achieves a dramatic reduction in peeling force—by about 50%*.

This not only minimizes the need for support optimization but also breaks through the limits of manual tuning, ensuring a comprehensive improvement in final print quality.

*Data sourced from HeyGears Lab, based on the large-format model with PAS10 resin

Successful Prints With a Support Critical Angle as low as 15°

The reduction in peeling force allows for a lower critical support angle, which minimizes the number of supports and the area of support contact points, thereby streamlining the post-processing workflow.

Push the Boundaries of Your Support Settings

The reduction in peeling force allows for more extreme support parameters: the diameter of the support contact point can be reduced by up to 30%*, achieving up to a 70%* reduction in the area of the support contact point.

Specifications

  • Input Voltage: 24V DC
  • Rated Power: 25 W
  • Dimensions: 310*148*235 mm 310*148*235 mm (12.52*35.83*39.25 in)
  • Weight: 3 kg