






UltraPrint-Modeling PAS10 標準モデリングレジンは、目立たないマット仕上げで、層間線を目立たなくし、高品質な表面処理に最適です。0.05mm未満の造形公差により、ミニチュアモデルや装甲部品を難なく製作できます。サポートなしの最小角度は25°で、複雑な形状にも対応し、サポート材の使用量を最小限に抑えながら優れた造形能力を発揮します。耐久性と耐衝撃性も高く、小ロット生産や試作に最適です。
製品のハイライト
- 印刷許容誤差 <0.05 mm - 小ロット生産に適しています
- 最小の支持角度25° - 優れた成形性
- マットな表面 - 肉眼では層状の線が見えない
- 変形や破損しにくい - 耐衝撃性
以下の 3D プリンターと互換性があります:
- UltraCraft Reflex 3DプリンターとUltraCraft Reflex RS 3Dプリンター
注意:本製品は自動樹脂補充には対応しておりません。
PAS10 White – Usage Guidelines
1. Support Requirements PAS10 White is a tough resin. Use auto-support settings for best results. If adding supports manually, make sure they are dense and stable enough to support the model during printing.
2. Mixing Instructions Shake the resin by hand for 45–90 seconds before use. Do not exceed 180 seconds. If the resin is already in the vat, stir well before each print or pour it back into the bottle, shake thoroughly, and reuse only after pigment has fully mixed.
3. Resin Tank Film Condition Always check the Resin Tank film before printing. If you see warping, cloudiness, or wear, please replace the film to avoid print failure.
4. Model Design Tips PAS10 White is not recommended for printing models with thin walls, long overhangs, micro holes, or fine gaps, as these fine structures may not print reliably.
Pairs well with

ウルトラプリントモデリングPAS10標準モデリング樹脂
We're committed to providing you with the best service. Please don't hesitate to reach out if you have any questions.
-
Shipping Information
Free shipping on orders over $399. Click here for more shipping details.
-
Customer Support
WhatsApp:
+1 949-283-2998(US)
Mon-Fri, 9AM-5PM PSTEmail Support:
contact@heygears.com
Technical Support:
customersupport@heygears.com
Distributors:
lwang@heygears.com
-
Get Started
Getting Started with Your HeyGears 3D Printer
-
FAQ’s
Please read our FAQs page to find out more.