Hear It From Our Users

Reliable C5 grade Z-axis Module

High repeat positioning accuracy ensures layer positioning errors are no more than 2 μm*. Tested with a 50 kg load across ten thousand runs.

Full-Field Precision Screen

LCD Screen Light Intensity Visualization

To achieve printing high accuracy and reliability, we partition the screen into 60 zones and calibrate it with a full-screen tool, ensuring light intensity variation remains within ±3%* for a printing tolerance of ≤0.05 mm.

Load video: <p>The RS automatically calibrates the screen using<strong> NFC </strong>data, keeping light intensity differences within <strong>5%</strong>* and reducing variations in light intensity to ensure printing precision after screen replacement.</p><p>*Data sourced from HeyGears Lab</p>

Printed Results Assembly Comparison

The RS automatically calibrates the screen using NFC data, keeping light intensity differences within 5%* and reducing variations in light intensity to ensure printing precision after screen replacement.

*Data sourced from HeyGears Lab

Adaptive Z-axis Compensation

Load video: <p>The adaptive process packages allows the RS printer to adjust the Z-axis compensation adaptively for each resin, to support up to <strong>180 combinations </strong>of different angles, hole sizes, and edge types.</p>

Adaptive Process Packages

The adaptive process packages allows the RS printer to adjust the Z-axis compensation adaptively for each resin, to support up to 180 combinations of different angles, hole sizes, and edge types.

Z-axis Compensation Comparison

This approach minimizes deformation and resin buildup on support surfaces, and reduces post-processing time compared to using just a single z-axis compensation parameter.

Built for High Speed 4.5 s/layer, Average Printing Speed*

*Data sourced from HeyGears Lab. With high-speed water-washable resin PAWW10, the average printing speed for lattice models reaches 4.5s/layer.**Printer frame flex within ±2 μm.***Cools screen temperature by up to 10℃ during printing.

Dynamic Motion Algorithm 3.0, 33% Increase in Print Speed*

*Data sourced from HeyGears Lab, utilizing PAWW10 water-washable resin, comparedto conventional motion control 3D printing. The exact speed increase may vary based on model.

Load video: <p>Utilizing aseven-segment motion control logic per layer, the RS reads real-time force sensor data at <strong>80 times</strong> per second, allowing it to adjust motion parameters efficiently, reducing redundant time and preventing printing failures.</p>

Single-Layer Dynamic Motion Control

Utilizing aseven-segment motion control logic per layer, the RS reads real-time force sensor data at 80 times per second, allowing it to adjust motion parameters efficiently, reducing redundant time and preventing printing failures.

Load video: <p>This algorithm assesses printing difficulty for each layer using factors like cross-sections, part spacing, and quantity, selecting from 18 optimized motion control parameters to ensure quality while enhancing speed.</p>

Comprehensive Dynamic Motion Control

This algorithm assesses printing difficulty for each layer using factors like cross-sections, part spacing, and quantity, selecting from 18 optimized motion control parameters to ensure quality while enhancing speed.

Printing Results Comparison

Load video: <p>One-click slicing without manual adjustment.</p>

Automatic Pre-processing

Complete Pre-processing in Just One Minute

One-click slicing without manual adjustment.

Load video: <p>Automatically detects and repairs model defects such as inverse normals, holes, and intersecting shells.</p>

Automatic Pre-processing

Automatic Repair Prevents Failures

Automatically detects and repairs model defects such as inverse normals, holes, and intersecting shells.

Load video: <p>Intelligently configured scaffold supports result in reduced detachments and a higher printing success rate.</p>

Intelligent Auto-Supports

Automatic Pre-processing

Intelligently configured scaffold supports result in reduced detachments and a higher printing success rate.

Load video: <p>Force sensors with a sensitivity of <strong>0.1 N</strong> can detect resin residue as small as <strong>0.2 mm </strong>and can auto-stop upon detection or print failure.</p>

Force Value Monitoring System

Residue Detection

Force sensors with a sensitivity of 0.1 N can detect resin residue as small as 0.2 mm and can auto-stop upon detection or print failure.

Load video: <p>A report is produced after each print to accurately identify issues.</p>

Force Value Monitoring System

Printing Analysis

A report is produced after each print to accurately identify issues.

Load video: <p>A floating screen system with a deviation of 0.15° eliminates gaps of up to 240 µm* for automatic leveling.</p>

Automated Printing Assistance

Floating Screen Auto Leveling

A floating screen system with a deviation of 0.15° eliminates gaps of up to 240 µm* for automatic leveling.

Load video: <p>The optional RS heated resin tank*uses an integrated heater for higher efficiency. It can elevate resin temperature from 50 °F (10 °C) to an optimal 73 °F (22 °C) in 20 minutes*, auto heating maintains this temperature throughout the printing process for optimal results.</p><p><em>*Requires a separate purchase of the RS Heated & Pulsing Release Resin Tank*Data sourced from HeyGears Lab</em></p>

Automated Printing Assistance

Automatic Resin Heating

The optional RS heated resin tank*uses an integrated heater for higher efficiency. It can elevate resin temperature from 50 °F (10 °C) to an optimal 73 °F (22 °C) in 20 minutes*, auto heating maintains this temperature throughout the printing process for optimal results.

*Requires a separate purchase of the RS Heated & Pulsing Release Resin Tank*Data sourced from HeyGears Lab

Load video: <p>Automatic resin refill before and during printing.</p>

Automated Printing Assistance

Automatic Resin Refill

Automatic resin refill before and during printing.

A Complete Production System

Specifications

3D Printing Technology:

– LCD (MSLA)

Build Volume:

– 222*122*230 mm

XY Native Pixel:

–29.7 μm

Accuracy:

– ±15 μm

Layer Thickness:

– 30-100 μm

Optical Wavelength:

– 405 nm

Size:

– 380*360*584 mm

Weight:

– 20 kg

Rated Power:

– 180 W

Voltage:

– 100-240 V~50/60 Hz

Size:

– 380*360*584 mm

Connectivity:

– USB/WIFI/LAN

Language:

– English, Simplified Chinese

Included in the Box

  • rs 3d printer

    Printer

  • Power Cord icon

    Power Cord

  • Part Removal Tool

  • Resin Tank

  • Build Platform

  • Allen Wrench

  • Scraper icon

    Scraper

FAQs

Please read our FAQs page to find out more.

Didn’t find your answer?

Don't hestitate to contact us

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
J
James Hootselle
This is the best 3d printer I’ve ever used

It prints anything anytime in the right environment.

12 prints in a row without a single failure. Smooth quality and helpful UI make this the go to resin printer when you want something done right the 1st time!

L
Luke Porter
Go on and buy this!

March 2025: Hours of personal research and reviews conducted and this machine kept showing up in the top 3 lists (mostly in the #1 spot). It's from a company I have not heard of, costs about twice as much as I usually spend, and has a proprietary ecosystem. BUT, if you do not want to tweak settings, tinker with details, and troubleshoot failures, just buy this already. I hate to be cliche, but...IT. JUST. WORKS. Spend the money and spend less time solving printing puzzles and more time enjoying your hobbies.

J
João Reis
Good but have room to improve

Good printer with room for improvement. Elephant foot compensation, Z offset, and other dimensional tools are required

R
Richard Vargas
Great product

After much research online, I bought the reflex rs. After setting it up I've made two prints and they came out amazing. This is my first resin printer and after navigating the blueprint studio I figured out how to do what I needed to print. Was not hard at all. Overall this is a great printer and I hope to print more as I get better at it.

G
Gabriel Uriarte
My first 3D printer

very intuitive, and no issues when printing