UltraPrint-Modeling PAS10 Standard Modeling Resin ( New Color)

HeyGears

UltraPrint-Modeling PAS10 Standard Modeling Resin ( New Color)

$32.99

PAS10 is a medium-viscosity, moderately strong and tough resin. The finished products have a fully matte finish and outstanding visual performance, making it ideal for rapid prototyping applications in fields such as figurines and consumer electronics.

Product Highlights

Printing tolerance <0.05 mm - suitable for small batch production
Smallest unsupported angle 25°- excellent forming ability
Matte surface - no visible layer lines to the naked eye
Not easily deformed or broken - impact resistant

Compatible with the Following 3D Printers:

UltraCraft Reflex RS Turbo 3D Printer & UltraCraft Reflex RS 3D Printer & UltraCraft Reflex 3D Printer

Note: This product does not support automatic resin refilling.

PAS10 White – Usage Guidelines

1. Support Requirements PAS10 White is a tough resin. Use auto-support settings for best results. If adding supports manually, make sure they are dense and stable enough to support the model during printing.

2. Mixing Instructions Shake the resin by hand for 45–90 seconds before use. Do not exceed 180 seconds. If the resin is already in the vat, stir well before each print or pour it back into the bottle, shake thoroughly, and reuse only after pigment has fully mixed.

3. Resin Tank Film Condition Always check the Resin Tank film before printing. If you see warping, cloudiness, or wear, please replace the film to avoid print failure.

4. Model Design Tips PAS10 White is not recommended for printing models with thin walls, long overhangs, micro holes, or fine gaps, as these fine structures may not print reliably.

Color: Pale Purple

Pale PurplePale Purple
BlackBlack
WhiteWhite
1*Pale Purple & 1*Black & 1*White1*Pale Purple & 1*Black & 1*White

Specification: 1000g/bottle

1000g/bottle
5*1000g/bottle
3*1000g/bottle

Product variants

Share:

Share

Pairs well with

UltraPrint-Modeling PAS10 Standard Modeling Resin ( New Color)

Pale Purple / 1000g/bottle

$32.99

Basic Performance

Very good detail on the prints

Very good detail on the prints. Even when I use the 'rapid' option in the slicer, the details are very good. Removing supports is fairly easy. Washing and curing seems to take much longer than in other resins.

Great resin at a good price!

Great resin at a good price! The black resin holds detail well for miniature painting and the price lets me print as much as I want without breaking the bank.

amazing product

Absolutely amazing product. I printed several models without having any issues or fails, even using the automatic support.

Almost as good as black PAP10

It's not as good as black PAP10, but good enough for me :). As far as precision it matches PAP10 very well. For prints requiring small details (down to 0.2 mm in some cases) I'll stick with PAP10, but for everything else this is as good as it gets. I like it a lot!